Glass guide

Which glass do you need?

Six make-ups cover every product we supply. Here is what each one is, when to use it, and the range we can make.

Detail A
2.85–19

Toughened glass

Heat-treated safety glass that breaks into small, blunt pieces.

Toughened (tempered) glass is heated and rapidly cooled, which makes it much stronger than ordinary annealed glass of the same thickness. If it does break, it shatters into small granules rather than sharp shards, so it is the standard choice for doors, showers, pool fences and balustrades. All cutting, edging and drilling is done before toughening.

Thickness
2.85–19 mm
Panel size
220 × 150 to 4000 × 1700 mm
Detail B
interlayer

Laminated glass

Two or more panes bonded with an interlayer that holds them together if broken.

Laminated glass bonds layers of glass with a plastic interlayer. If the glass breaks, the pieces stay attached to the interlayer and the panel stays in its frame. It is used where a broken panel must not fall out, such as balustrades, overhead glazing and facades, and it also cuts noise and UV.

Available as
Flat, bent, Low-E and in DGUs
Panel size
Up to 4000 × 1700 mm
Detail C
coating

Low-E glass

A thin, invisible coating that reflects heat to improve energy efficiency.

Low-emissivity (Low-E) glass carries a microscopically thin coating that lets daylight through while reflecting heat. It keeps buildings warmer in winter and cooler in summer, and is usually built into double-glazed units. We toughen Low-E glass in flat and bent forms on our convection furnace.

Thickness
2.85–19 mm flat, 3.1–15 mm bent
Panel size
Up to 4000 × 1700 mm flat
Detail D
air /argon6–27

Double glazing (DGU / IGU)

Two panes sealed around a spacer, with air or argon in the gap.

A double-glazed unit (DGU, also called an insulated glass unit or IGU) seals two panes around a spacer bar. The gap slows heat transfer and reduces noise. We build units to your specification for gas fill (for example argon), spacer material and colour, and inner frames, including bent units.

Make-up
4 + 6A + 4 to 6 + 27A + 6
Unit size
220 × 150 to 4000 × 1700 mm
Bent units
Min. radius 550 mm
Detail E
R ≥ 550

Bent toughened glass

Curved glass toughened to shape for showers, displays and facades.

Bent toughened glass is heated, formed to a curve and toughened in one process. Whether a particular panel is possible depends on its thickness, radius, length, depth and curve, so send us the drawing and we will confirm. Bent glass can also be Low-E coated or made into a double-glazed unit.

Thickness
3.1–15 mm
Panel size
350 × 350 to 1200 × 1700 mm
Min. radius
550 mm
Detail F
silvering

Mirror

Precisely edged mirrors in custom shapes and tints.

Our mirrors are cut and edged to shape for wardrobe doors, bathrooms and fitness studios. They can be bevelled, drilled, cut out, tinted or backed with safety film.

Edges
Polished, bevelled or shaped
Options
Tint, holes, cut-outs, safety film
Processing

Done before toughening

Toughened glass cannot be cut or drilled afterwards, so every hole, notch and edge is finished first. All of these are available across our glass types; see the capacity table for exceptions.

Capacity table →
  1. Coated
  2. Bevelled
  3. Irregular (shaped) edges
  4. Holes
  5. Cut-outs
  6. Laminated
  7. Sandblasted (frosted)
  8. Silk-printed
  9. Coloured
  10. Safety film
Quote

Send us your glass schedule.

Drawings, a cutting list or just sizes and quantities. We will check it against our capacity and come back with a price.

CallRequest a quote